The
CPM-700 is a broadband receiver designed to detect and locate all
major types of electronic surveillance devices including room,
phone, body bugs, video transmitters, and tape recorders. Portable
Sweep Kit - provides everything needed to perform a professional
sweep; fits inside a standard briefcase.
Multi-Functional Utility - Comes with probes to
detect RF transmitters (audio and video), carrier current
transmitters, and telephone bugs. Probes also available to detect
for infrared transmitters, tape recorders, and acoustic leakage.
Wideband Coverage - from 200Hz to over 3GHz with no
holes or gaps.
Monitor Mode - after a sweep, the alarm monitor
(silent or audible alert) guards against new devices brought in or
remote control activation of surveillance devices.
Auxiliary Audio Input - allows user to listen to
telephones or lines for "hotmikes," hookswitch by-pass and
"infinity" bugs. Unknown wires and cables can be tested for wired
microphones.
Broadband receivers such as the CPM-700 provide a very important
cost-effective tool for professional sweep teams, government
security personnel, and private citizens with important security
needs.
The
CPM-700 is very effective for rapidly detecting and locating
transmitted signals, while being very easy to learn to use. The
CPM-700 sweep kit includes a custom Cordura case that contains all
items necessary to conduct a professional sweep.
What's In The Box
|
• |
CPM-700
Unit |
|
• |
Carry
Case with all standard Items |
Specifications
|
• |
R.F. Probe: |
|
• |
Gain: 20dB nominal
Frequency |
|
• |
Response: 50kHz-2GHz ±3dB
3GHz-10dB |
|
• |
Sensitivity: -62dBm (1
segment) -85dBm M.D.L. |
|
• |
|
|
• |
VLF Probe: |
|
• |
Frequency Response:
15kHz-1MHz-3dB |
|
• |
MAX input voltage: 300
VAC 50-60Hz |
|
• |
Isolation: 1500 VAC 60Hz |
|
• |
Sensitivity: -38dBm (1
segment) -60 M.D.L. |
|
• |
|
|
• |
Audio Amplifier: |
|
• |
Input Impedance: 50K Ohm
balanced |
|
• |
Input Range: 1.7uV-10V
(135dB) AGC |
|
• |
Dynamic Range: 100dB
(high and low gain) |
|
• |
Frequency Response:100Hz-
15kHz±3dB (filtered) 500Hz-24dB/octave, 2.5kHz-18dB/octave |
|
• |
Headphone Output: 5Vp-p
220 |
|
• |
Record Out: 25 mVp-p
nominal with AGC |
|
• |
|
|
• |
Display: |
|
• |
LCD bargraph: 18 segment
with pulsing single segment trip point |
|
• |
50dB dynamic range (1
segment High Gain to MAX Low Gain) |
|
• |
Alert Output: 2.8kHz tone
or silent red LED at 2Hz |
|
• |
Remote Output: N.O.
contact (300mA 25V MAX) |
|
• |
|
|
• |
Battery: |
|
• |
8 ea. MN1500 AA Alkaline
- Life 10-16 hrs |
|
• |
Low Battery Indicator:
approx. 10% remaining power |
|
• |
|
|
• |
AC
Adapter/Charger |
|
• |
Input: 95-l30VAC 50-60Hz,
or 200-275VAC 50-60Hz |
|
• |
Output: 12VDC with 500mA
NiCad Recharge Time: 8-10 hrs |
|
• |
|
|
• |
Options, Call for
details |
|
• |
|
|
• |
IRP-700
Infrared Probe enables the operator to detect and locate
surveillance devices that utilize infrared energy as the
transmitting medium. |
|
• |
MLP-700
enables the operator to detect and locate magnetic recording
devices such as audio or video tape recorders. |
|
• |
ALP-700
With the Acoustic Leakage Probe, the operator can determine
the vulnerability of accoustic leakage by placing the
ALP-700 against structural objects such as walls or windows. |
|
• |
MPA-700
Modular Phone Adapter gives the CPM the ability to test a
location's phone wiring for surveillance devices. |
|
• |
TRP-700
Tape recorder Patch Cable allows the the audio from the CPM
to be recordered for a more in depth analysis at a later
time. |
|
• |
CLA-700
Cigarette Lighter Adapter allows the CPM to operate and
recharge the NCB-700 battery pack while traveling. The
adapter provides 12VDC power from automobile sockets. |
|
• |
NCB-700
NiCad Battery Pack allows for a portable and reusable power
source. The pack consists of eight rechargeable Nickel
Cadmium AA cells which can be recharged overnight numerous
times.
|